As the International Space Station (ISS) marks two decades of continuous human presence, circling the Earth more than 120,000 times with key participation from Airbus, planning is now underway for an exciting next step: setting humanity on a sustainable course to the Moon, with the company having an important role in this new adventure.

Airbus’ long list of ISS contributions covers activities from development of software and experiments, mission preparations and system integration to flight operations, cargo resupply, hosting of payloads aboard the facility, and the provision of such infrastructure elements as the rack-mounted regenerative life support system. 


Astronaut Alexander Gerst

Astronaut Alexander Gerst is shown with the International Space Station’s Life Support Rack, which was built by Airbus and has been aboard the orbital facility since October 2018.


Cooperation that spans the globe 

With the ISS’ international scope, Airbus has worked with the primary partners, spanning Europe, the U.S., Russia, Japan and Canada – cooperating with national space agencies and industry, thereby providing a framework for the company’s involvement in future space exploration.


With our achievements on the ISS, Airbus has earned its role in taking humankind back to the Moon and deeper into space.

- Gerd Hajen, Systems and Operations Engineer in Airbus’ Low-Earth Orbit and Suborbital Missions Department


Airbus’ ISS involvement traces its roots to the space station’s early days, as the company produced Data Management System computers for Russia’s Zvezda Service Module. Zvezda was launched during the summer of 2000 as the station’s third module, and its Airbus-built fault-tolerant computers collect data and provide navigation, handle command/control, along with facilitating communications and operations for the station’s Russian segment.



This early image of the International Space Station (ISS) was taken when Space Shuttle Atlantis approached the ISS for docking in September 2000. A Russian Progress supply ship is linked with the Russian-built Zvezda service module, which has Data Management System computers provided by Airbus. Photo credit: NASA


Experiments in Earth orbit

Two years later, the space station received a logistics module containing Airbus’ Microgravity Science Glovebox, which provides an enclosed, safe environment for experiments using liquids, naked flame and particles – all while closely simulating laboratory conditions typically found on Earth.  The glovebox has operated for thousands of hours aboard the ISS, used in such investigations as material science, thermal management, protein crystal growth, life sciences, fire detection, combustion and technology demonstrations.

Beginning in 2006, the Airbus-supplied Minus Eighty-Degree Laboratory Freezers for ISS (MELFI) were added to the station, enabling refrigerated storage and freezing of biological and life science samples.

More recently, the Airbus-developed Bartolomeo platform has been attached to the ISS’ exterior for hosting payloads. Airbus offers an end-to-end service with technical support for payload preparations, launch and installation, operations and data transfer, as well as an optional return to Earth. Scheduled to enter service early next year, the Bartolomeo platform offers the only unobstructed ISS view towards Earth and into outer space, with applications for its hosted payloads including (but not limited to) Earth observation, robotics, material science and astrophysics. 



The Airbus-supplied Bartolomeo platform is depicted on the International Space Station’s exterior in this composite image.


Airbus’ ISS prime contractor roles

During the past 20-plus years, Airbus has stepped up as the prime contractor for two key ISS elements: the Columbus pressurised module that has served as a permanently-attached multifunctional laboratory since February 2008; and the Automated Transfer Vehicle (ATV) cargo spacecraft for ISS resupply missions, which performed five heavy-lift flights between 2008 and 2015.

The Columbus module is Europe’s largest single contribution to the ISS, and Airbus’ responsibilities have covered the module’s engineering, development of experiments, integration and testing, launch preparations and processing. In addition, Airbus helped set up the Columbus control centre and ground segment in Oberpfaffenhofen, Germany, and provided support for flight control and operations at this German ground facility.


German Astronaut Thomas Reiter

German Astronaut Thomas Reiter works with one of the MELFI (the Minus Eighty-Degree Laboratory Freezers for ISS) from Airbus, which came aboard the ISS beginning in 2006.


'Keeping the lights on' with ATV

In welcoming 240-plus crewmembers aboard the ISS since it was first occupied on 2 November 2000, the space station has required regular replenishment of supplies. The Airbus-developed Automated Transfer Vehicle helped keep the ISS alive and active by delivering more than 31.5 tonnes of supplies (including propellant, water, air, food, and scientific research equipment), while also using its own propulsion system to raise the station’s orbit numerous times and help manoeuvre it clear of space debris.

The ATV's capabilities – particularly its automatic docking with the ISS and providing life-supporting services – underscored Airbus’ mastering of vital technologies that can be applied in future space exploration missions. This, together with all Airbus’ expertise demonstrated throughout the space station’s orbital career, contributed to the company’s selection as a full partner in Orion – the next U.S.-led spacecraft to send humans into space – ESA’s contribution to NASA’s Artemis programme. 


NASA Astronaut Kevin Ford

The International Space Station’s Microgravity Science Glovebox, produced by Airbus, is visible in the foreground of this photo. In the background is NASA Astronaut Kevin Ford.


Over the Moon with Orion

Airbus is responsible for Orion’s European Service Module, which will provide propulsion, power, water, oxygen and nitrogen, as well as keeping the spacecraft at the right temperature and on the correct flightpath. Three European Service Modules are contracted to be developed and delivered by Airbus for use with Orion as it takes crews to the future Gateway lunar orbiting station for exploration of the Moon – with the possibility for travel further out in space…even reaching an asteroid and perhaps Mars.  


NASA Orion spacecraft

This is how the NASA Orion spacecraft – with its Airbus-supplied European Service Module – will look when taking crews to the future Gateway lunar orbiting station for exploration of the Moon and beyond.