In order to give you a better service Airbus uses cookies. By continuing to browse the site you are agreeing to our use of cookies I agree

23 May 2018

Supporting Clean Sky

Leading the development of cutting-edge technology demonstrators

Supporting Clean Sky

Airbus plays a major role in Clean Sky and is leading the development of several cutting-edge technology demonstrators that will help with sound reduction and lowering CO2 and gas emissions produced by aircraft.

In the last 50 years, the aviation industry has cut fuel burn and CO2 emissions per seat / kilometre by more than 80%, NOx emissions by 90% and sound levels by 75%. Despite this impressive progress, society and the rapid growth rate in air traffic are placing increasing demands on the industry to seek further improvements.

According to the Airbus Global Market Forecast, 35,000 new aircraft will need to be built by 2036 to meet increasing demand in air travel. Air traffic is set to grow at 4.4% per year during this timeframe. The need to reduce aviation’s environmental impact is considerable – but so is its commitment to doing so.

As Europe’s leading aerospace company, Airbus has a major role to play. Enhancing scientific research and promoting international cooperation for sustainable development are a key part in the company's commitment to the UN Sustainability Goals.

Helping to meet these goals is the work Airbus carries out under Clean Sky, the EU’s multi-billion-euro research programme to develop innovative technology for sound reduction and lowering CO2 and gas emissions produced by aircraft. Airbus plays a major role in Clean Sky and is leading the development of several cutting-edge technology demonstrators that will help increase the sustainability of flight.

Airbus and Rolls-Royce UltraFan Engine Integration Collaboration

Airbus and Rolls-Royce have signed a collaboration agreement for the integration of Rolls-Royce’s UltraFan® demonstrator for flight testing

UltraFan: improving engine efficiency

In April 2018, Airbus announced a collaboration with Rolls-Royce to integrate the UltraFan demonstrator for flight testing, a project that will be co-funded by Clean Sky. A scalable jet engine design for widebody or single-aisle aircraft, UltraFan offers a 25% improvement in fuel efficiency over the first generation of Rolls-Royce Trent engine. Airbus will provide both nacelle hardware and engine/aircraft integration architecture and technology enablers in participation of ground and flight tests.

Airbus’ longstanding expertise in powerplant integration will be crucial in enabling the UltraFan to achieve this efficiency gain, as will the company’s capabilities in advanced production techniques such as additive manufacturing. The project will allow Airbus to fully integrate the engine onto the next generation of long-range aircraft, in addition to facilitating scalability for short-range aircraft.  

Static Display at ILA Berlin 2018 Airbus - Celian Bauduin
 / 
Static display 27 April 2018

Static Display at ILA Berlin 2018

Dubbed “Flight Lab,” an A340 demonstrator aircraft shows off its outer wing test sections designed for highly smooth airflow over their surfaces; the BLADE project – for Breakthrough Laminar Aircraft Demonstrator in Europe – was showcased by Airbus at the 2018 ILA Berlin air show

Read more
A340 BLADE landing at ILA 2018 Airbus - Schwarzbild Medienproduktion - Max Thum
 / 
A340 Family 24 April 2018

A340 BLADE landing at ILA 2018

An Airbus A340 with modified outer wing sections is seen at the 2018 ILA Berlin air show; the BLADE test aircraft – short for Breakthrough Laminar Aircraft Demonstrator in Europe – aims to improve aviation’s ecological footprint with wings that could bring up to 50 percent reduction in air friction and lower CO2 emissions by as much as five percent

Read more
Airbus BLADE Project at ILA 2018 Airbus - Schwarzbild Medienproduktion - Max Thum
 / 
ILA2018 25 April 2018

Airbus BLADE Project at ILA 2018

An Airbus A340 with modified outer wing sections is seen at the 2018 ILA Berlin air show; the BLADE test aircraft – short for Breakthrough Laminar Aircraft Demonstrator in Europe – aims to improve aviation’s ecological footprint with wings that could bring up to 50 percent reduction in air friction and lower CO2 emissions by as much as five percent

Read more
Group Visiting A340 BLADE Airbus - Schwarzbild Medienproduktion - Florian Döring
 / 
ILA2018 26 April 2018

Group Visiting A340 BLADE

BLADE: a new type of wing

Much has been done in recent years to reduce wing drag – and therefore reduce fuel consumption – from lengthening the wings to adding winglets. But the potential gains from this technology are reaching their limits. “That’s why we have to take a more radical step forward,” says Axel Flaig, Senior Vice President of Research and Technology at Airbus. “BLADE is that step.”

We anticipate a reduction in drag by up to 50%. This would cut fuel consumption and ultimately reduce emissions

- Axel Flaig, Senior Vice President of Research and Technology at Airbus

By modifying the shape, materials and surface of the wings, BLADE (Breakthrough Laminar Aircraft Demonstrator in Europe) represents an approach never used before in commercial aviation. “With technology now mature enough to use carbon fibre reinforced plastic, we anticipate a reduction in drag by up to 50%. This would cut fuel consumption and ultimately reduce emissions,” says Flaig.

BLADE is a key part of Clean Sky and Airbus heads a team of more than 20 partners on the project. The Airbus A340 Flight Lab BLADE demonstrator is the largest flight test demonstrator ever launched in Europe and has already logged more than 60 flight hours. Testing will continue into 2019, with a focus on analysing robustness. Flaig says the results could “open the door for industrialisation of this groundbreaking technology”.

Interview with Frank Chapman on Blade during ILA Berlin Air Show 2018

 

Frank Chapman is Experimental Test Pilot at Airbus Commercial Aircraft. Read less Read more

Racer: high-speed rotorcraft 

Also in the framework of the Clean Sky research programme is the high-speed Racer (Rapid And Cost-Effective Rotorcraft) demonstrator which aims to bridge the gap between traditional helicopters and fixed-wing aircraft. Optimising the trade-off between speed, payload, and range with agility in vertical flight, Racer will approach the mission capability of fixed-wing aircraft, yet also be able to take off and land vertically.

Racer features an innovative ‘box-wing’ design, optimised for aerodynamic efficiency, and an ‘eco mode’ will be tested to demonstrate an electrically powered ‘start and stop’ of one engine in flight, generating fuel savings and increasing range.

The increased speed and efficiency of the Racer technology will bring added value for a wide spectrum of missions, most notably emergency medical services and search and rescue operations, as well as public services, commercial air transport and private and business aviation. Final assembly of the helicopter demonstrator is expected to start in 2019, with a first flight the following year.

By Geoff Poulton,  23 May 2018

Racer Cleansky2 Pressrelease 200617 02

The Racer demonstrator will incorporate a host of innovative features and will be optimised for a cruise speed of more than 400 km/h.

Related stories

Eagle eyes

Farnborough Airshow Day 5: With diversity at Airbus, ‘we make it fly’

en

Airbus extends Skywise to suppliers

en

The future is electric

Rethinking city transport

Airbus looks to the “underutilised sky” for urban mobility

Back to top