In order to give you a better service Airbus uses cookies. By continuing to browse the site you are agreeing to our use of cookies I agree

A330-200F

A330-200F

The right aircraft, right now

As a new-generation freighter derived from Airbus' proven A330 jetliner family, the A330-200F offers highly-efficient operation with less noise and emissions than mid-sized cargo aircraft in service today. Customers have praised the A330-200F for its outstanding flexibility, which is further enhanced by the freighter’s full operational commonality with Airbus’ fly-by-wire family of single-aisle and widebody jetliners. In addition, its large main deck cargo door allows the aircraft to accept all commonly-used pallets and containers. 

Our Freighter products

A330-200F

A330P2F

Beluga

  • Range 7 400 km up to 4000 nm
  • Height 16.88 m 55 ft 5 in
  • Wing span 60.30 m 197 ft 10 in
Dimensions
Overall length
58.82 m
Cabin length
45.00 m
Fuselage width
5.64 m
Max cabin width
5.28 m
Wing span (geometric)
60.30 m
Height    16.88 m
Track
10.70 m
Wheelbase
22.20 m
Capacity
Max payload
  65 (70) tonnes
Pallets or containers
main deck  
up to 23 pallets
  underfloor
8 pallets + 2 LD3 containers
Performance
Range
up to 7400 km
Mmo
M0.86
Max ramp weight
233.9 tonnes
Max take-off weight        233.0 tonnes
Max landing weight
187.0 tonnes
Max zero fuel weight       178.0 tonnes
Max fuel capacity              97 530 litres
Dimensions
Overall length
193 ft 0 in
Cabin length
147 ft 8 in
Fuselage width
18 ft 6 in
Max cabin width
17 ft 4 in
Wing span (geometric)
197 ft 10 in
Height    55 ft 5 in
Track
35 ft 1 in
Wheelbase
72 ft 10 in
Capacity
Max payload
  141.10 (153) lb x 1 000
Pallets or containers
main deck  
up to 23 pallets
  underfloor
8 pallets + 2 LD3 containers
Performance
Range
up to 4000 nm
Mmo
M0.86
Max ramp weight
515.7 lb x 1000
Max take-off weight        513.7 lb x 1000
Max landing weight
412.3 lb x 1000
Max zero fuel weight       392.4 lb x 1000
Max fuel capacity              25 765 USG

Advantages

The A330-200F features an optimised fuselage cross-section, offering flexibility to carry a wide variety of pallet and container sizes. The aircraft offers 30 per cent more volume than any freighter in its class, and is based on the proven and technologically-advanced A330 platform, for which Airbus has over 1,000 orders and already more than 650 aircraft in service.

Proven in commercial service

Since its service entry in 2010, the world’s most modern mid-size freighter – Airbus’ A330-200F – has established itself as a reliable, flexible and profitable operator on all continents. Major cargo carriers around the world have turned to the A330-200F for long-haul and regional missions as the aircraft has attained a reliability rate of more than 99.6 per cent and in-service utilisation up to 400 flight hours per month. 

Customers have praised the A330-200F for its outstanding flexibility, which is further enhanced by the freighter’s full operational commonality with Airbus’ fly-by-wire family of single-aisle and widebody jetliners. In addition, the A330-200F’s large main deck cargo door allows the aircraft to accept all commonly-used pallets and containers, enabling the transport of a full range of cargo – from high-value consumer goods to express packages and perishables.

Ideally suited to the rapidly changing market conditions, the A330-200F is shaping the future of air cargo transport. The flexible mid-sized aircraft offers operators an adaptable cargo strategy with up to 35 per cent lower operating costs per tonne compared to larger freighters, as well as optimised load factors. 

The Airbus Global Market Forecast (GMF) forecasts a demand of nearly 800 new-built freighters during the next 20 years. The A330-200F will satisfy a large percentage of this demand by offering better main- and lower-deck flexibility than the competition, with more range and more lift.

 

An advanced solution

A highly efficient all-cargo solution to replace services of passenger and cargo “combi” aircraft

As a new-generation freighter derived from Airbus' proven A330 jetliner family, the A330-200F offers highly efficient operation with less noise and emissions than the ageing fleets of mid-sized cargo aircraft used in worldwide service today.

The A330-200F offers better payload, range and economics than previous-generation freighters in its class; the A330-200F also provides the full benefits of operational commonality with Airbus’ fly-by-wire family of single-aisle and widebody jetliners. It represents an ideal replacement for obsolete first-generation widebody freighters, and also provides airlines with a highly efficient all-cargo solution to replace services of passenger and cargo “combi” aircraft.

Customers

Airline customers with firm A330-200F orders are Etihad Airways (for the Etihad Crystal Cargo division), Turkish Airlines (for the Turkish cargo division) which became the biggest A330-200F operator in 2013, MNG Airlines in Turkey, AviancaTaca (for its Tampa Cargo operation) in South America, Malaysia Airlines which purchased four freighters for the carrier’s MASkargo subsidiary, and Hong Kong Airlines (3 bought back from Aircastle in August 2013 and one operated from BOC).

The first A330-200F provided to a customer was handed over to Etihad Airways during a ceremony at the 2010 Farnborough Airshow.  The second receiving Airbus’ next-generation A330-200F was Hong Kong Airlines, while Turkish Airlines became the third in September 2010. MASkargo received its initial A330-200F in September 2011.

Tampa Cargo, which is AviancaTaca Holding’s Colombia-based cargo airline, was provided the first of four A330-200Fs from Airbus in December 2012 – marking the initial handover of this freighter type to a customer based in the Americas.

Leasing and service companies acquiring A330-200Fs to date are U.S.-based Aircastle and Intrepid Aviation Group, BOC Aviation (previously known as Singapore Aircraft Leasing Enterprise) and Synergy Aerospace in Brazil.

In March 2013, the list of international carriers enhancing their aircraft fleets with Airbus’ A330-200F expanded with delivery of the first freighter for Qatar Airways – which was leased from BOC Aviation.

 

Performance and Efficiency

With the capacity and range to profitably serve growing global cargo markets, the A330-200F offers significant opportunities to grow in underserved markets at no additional cost per tonne.

The A330-200F flies 20 per cent further and has a cost per tonne that is 13 per cent lower than its direct competitor. It is capable of carrying 65-to-70 tonnes of payload, with a range that stretches from 3,200 nm up to 4,000 nm.

This modern cargo jetliner utilises a wide range of innovations that make it the most economical and environmentally-friendly freighter in service today. Among these cost-reducing features are the aircraft’s reinforced fuselage and doors, which increase shear and bending/running loads; its use of the latest in eco-efficient engine technologies for reduced CO2 emissions and noise levels; along with a “glass cockpit” and advanced navigation systems for enhanced flight operations.

Its 141 X 101-inch main deck door is electrically-controlled and hydraulically-operated, and is derived from the proven cargo door on A300/A310 freighters. Additional features include the latest in eco-efficient engine technologies for enhanced environmental performance, as well as its “glass cockpit” and advanced navigation systems for improved flight operations.

 

A330 200F FIDAE2010 1 Hr

Versatility

Overall flexibility has been enhanced with the introduction of Airbus’ versatile main deck cargo loading system, which can accommodate all industry-standard containers and pallets – enabling operators to serve the freight lift needs of varying markets.

The A330-200F can transport up to 23 side-by-side pallets on its main deck, with flexibility for additional arrangements such as single-row loading of 16 pallets, and a mix of 9 AMA containers with four pallets. The spacious lower-deck cargo hold accepts up to 26 LD3 containers, plus 19.7 cubic metres of bulk cargo.

 

Sustained production

The A330-200F is based on Airbus' popular A330-200 passenger jetliner, and is produced on the same Toulouse, France final assembly line as other A330 and A340 Family aircraft.  This ensures a sustained output, providing production line slots to meet market demand.

 

A330 200F Map
Our product portfolio

A320 Family

A330 Family

A350 XWB Family

A380

ACJ318

ACJ319neo

ACJ320neo

ACJ321

ACJ330

ACJ340

ACJ350 XWB

ACJ380

A330-200F

A330P2F

Beluga

A300-600

A300-600F

A310

A340 Family

How an aircraft is built

How an aircraft is built

Airbus Family Figures

Airbus Family Figures

Brochure

Back to top